Author Archives : admin

Crank Shaft Gauge

Item Code: CS For the American market, Universal Test Set meeting the requirements of AGD standard available.

Back Plunger Dial Gauge

Item Code: F02 A unique face reading dial gauge with sensing plunger at right angles to the dial.

Lever Dial Indicator REQUEST CALLBACK

Dial gauge with lever to sense the dimension suitable for use in Tool Room to transfer hieghts using a hight gauge to check leveling and runout etc.

Depth Micrometer

Item Code: MMA25 0 – 25 x 0.01 mm Salient Features: Carbide tipped spindle. Hardened measuring face.

Item Code: w1 Salient Features: Swiss technology. Rotating display (270 degrees ) with extra large digits for excellent visibility. Accurate capacitive measuring sensor. Opto-coupled RS232C output. Hardened and ground stainless steel plunger and stem. IP 51 protection. Same gauge can be set to 0.01 mm/ 0.0005 in. reading depending on application. Each gauge caliper carries a […]

Dial Depth Gauge

Item Code: K158 Salient Features: Suitable for quick and easy measurements of depths. Base with 80 mm length hardened and ground to a high degree of flatness. Supplied with a set of extension rods for measurement of wide variety of depths. Supplied with Tungsten Carbide contact point for longer life.. For the American market, Depth Gauges […]

OUTSIDE SNAP GAUGE

Code Range Arm length Tip length x diameter 421-020-11 0-20mm 60mm 6x3mm 421-040-11 20-40mm 60mm 6x3mm 421-060-11 40-60mm 55mm 6x3mm 421-080-11 60-80mm 55mm 6x3mm 421-100-11 80-100mm 55mm 6x3mm Graduation: 0.01mm Pin tips

INTERNAL SNAP GAUGE

Code Range Arm length Tip length x diameter 411-035-11 15-35mm 50mm 3x3mm 411-055-11 35-55mm 80mm 6x3mm 411-075-11 55-75mm 90mm 8x3mm 411-095-11 75-95mm 100mm 8×3.2mm 411-115-11 95-115mm 150mm 10×3.2mm 411-135-11 115-135mm 150mm 10×3.2mm Graduation: 0.01mm Pin tips

DIGITAL THICKNESS GAUGE 0.001MMX10MM

Code Range Resolution Accuracy 441-010-11 0-10mm ±0.001mm ±0.005mm 441-010-12 0-10mm ±0.01mm ±0.02mm Ceramic spindle tip and anvil Button: on/off, zero, mm/inch Automatic power off Data output

DIGITAL SPIRIT ANGLE LEVEL

Code Range Resolution Accuracy 725-360-01 0 – 360°（90°x4） 0.1° ± 0.2° Use as level or protractor Buttons: on/off, ABS, hold, alarm, unit, backlight With vertical and horizontal vials Absolute horizontion reference can save in memory for ever Magnetic base Adjust the display direction automatically

DIGITAL ANGLE GAUGE

Code Range Resolution Accuracy 722-360-01 360°（90°x4） 0.05° ± 0.2° Can be used as level and protractor Aluminum frame provides with high rigidity and low weight Magnetic base with V-groove Absolute horizontion reference can save in memory for ever

INFRARED THERMOMETER

Easy to operate Portable structure design Technical specification Temperature -50℃-900℃ Accuracy 1.5% or 1.5 ℃ Repeatibility 0.5 ℃ or 1% Distance spot ratio 12:1 Reponse time 500ms Resolution 0.1 ℃ Power supply 9V battery Emissivity 0.1-1.00 adjustable Weight 196g Dimension 186×119×50 mm Standard delivery Main unit 1pc 9V battery 1pc

ZERO SETTER

Code Accuracy Height 695-050-01 ±10μm 50mm

ZL-27A Fluorescent Penetrant Magnaflux

ZL-27A’s formulation has been designed to be impervious to water to protect it from over washing and permit more penetrant to remain in discontinuities for improved detection of small defects. It and other post emulsifiable penetrants require the application of a lipophilic or hydrophilic emulsifier to render them washable with water. Zyglo® ZL-27A fluoresces a bright […]

ULTRAVIOLET BLACK LIGHTS ZB-100F

The Magnaflux ZB-100F Portable Black Light System produces long wave ultraviolet light at 365 nanometers. A built-in, quiet operating fan located at the rear of the ZB-100F lamp housing dramatically reduces operating temperatures to under 85°F, for improved operator safety and comfort while simultaneously extending bulb life. General Specifications ZB-100F Ultraviolet Black Light Weight Hand […]